High-strength sheet made of galvanized cold-rolled steel filled with high-density mineral wool board. The platband allows you to hide the unevenness of the construction opening.
Galvanized steel frame made of 1.5 mm solid bent profile. Wide C-shaped frame 47 mm wide.
An elastic and durable specially shaped seal made of thermoplastic elastomer does not deform under temperature fluctuations (will last more than 10 years).
Adjustable galvanized steel hinges with anti-removal pins protect against removal from the hinges and provide a door opening angle of more than 180°.
Parameter | Value | Notes |
---|---|---|
Number of cycles | 500,000 | |
Force of manual opening and closing, N | no more than 72/150 | |
Noise insulation, dB | 33 | |
Strength of fastening of handles to a cloth, H | 1,000 | |
Thermal resistance, m² · °С/W | 1,1 |
The door can be used in industrial atmospheres, in areas with temperate and cold climates, in closed heated and ventilated rooms at ambient temperatures from -25 to +40 °C with relative humidity up to 80%.
If the door is operated from the street side, installation should be done in a cold vestibule to prevent possible condensation on the surface and, as a consequence, deformation of finishing materials.
To avoid fading of the door block coating, installation should be carried out using a protective visor to prevent sunlight and precipitation from reaching the surface of the door block.
It is not allowed to close the door leaf with the locks or bolts extended. This can lead to failure of the lock mechanisms and deformation of the bolts.
Foreign objects are not allowed to get into the openings of the door frame, as well as between the frame and the door leaf. It is recommended to cover the door with protective materials during repair and construction work.
It is prohibited to install additional equipment or accessories, or to replace or adjust individual parts yourself without consulting the manufacturer.
Care for decorative panels is carried out in accordance with the requirements for the care of furniture and wooden products. Do not use cleaning agents, aggressive liquids, solvents or abrasives.
If door systems are used for purposes other than their intended purpose, the manufacturer is not responsible for their integrity and proper operation.
It is recommended to lubricate the hinge assembly with a thin layer of lubricant every 6 months.
Packing in bubble wrap | Packaging features |
---|---|
Contents | Bubble film, cardboard corner, stretch film |
Description | It consists of a door block wrapped in bubble wrap at the corners, a cardboard corner that ensures the safety of the door during transportation, wrapped in stretch film |
Height, mm | 90 |
Length, mm | 2,100 |
Width, mm | 900; 1,000 |
Packing on pallet | Packaging features |
---|---|
Contents | Pallet, stretch film, cardboard corner |
Description | Packed doors are stacked vertically on a pallet; A cardboard corner is installed in the corners, designed to preserve the doors during transportation; then the packaging is wrapped with stretch film |
Number of items in the packaging | 22; 23 |
The door can be transported in the manufacturer's packaging both vertically and horizontally by all types of covered transport or in containers.
When transporting and storing doors, measures must be taken to protect them from mechanical damage, violation of original packaging, contamination, and exposure to precipitation.
9. We undertake, at our option, to eliminate identified defects, replace defective products with serviceable ones, or reimburse the costs of purchasing defective products. We do not cover the costs of dismantling and installing the door, as well as transportation costs, except in cases specifically stipulated in the purchase and sale agreement.
High-strength sheet made of galvanized cold-rolled steel filled with high-density mineral wool board. The platband allows you to hide the unevenness of the construction opening.
Galvanized steel frame made of 1.5 mm solid bent profile. Wide C-shaped frame 47 mm wide.
An elastic and durable specially shaped seal made of thermoplastic elastomer does not deform under temperature fluctuations (will last more than 10 years).
Adjustable galvanized steel hinges with anti-removal pins protect against removal from the hinges and provide a door opening angle of more than 180°.
Parameter | Value | Notes |
---|---|---|
Number of cycles | 500,000 | |
Force of manual opening and closing, N | no more than 72/150 | |
Noise insulation, dB | 33 | |
Strength of fastening of handles to a cloth, H | 1,000 | |
Thermal resistance, m² · °С/W | 1,1 |
The door can be used in industrial atmospheres, in areas with temperate and cold climates, in closed heated and ventilated rooms at ambient temperatures from -25 to +40 °C with relative humidity up to 80%.
If the door is operated from the street side, installation should be done in a cold vestibule to prevent possible condensation on the surface and, as a consequence, deformation of finishing materials.
To avoid fading of the door block coating, installation should be carried out using a protective visor to prevent sunlight and precipitation from reaching the surface of the door block.
It is not allowed to close the door leaf with the locks or bolts extended. This can lead to failure of the lock mechanisms and deformation of the bolts.
Foreign objects are not allowed to get into the openings of the door frame, as well as between the frame and the door leaf. It is recommended to cover the door with protective materials during repair and construction work.
It is prohibited to install additional equipment or accessories, or to replace or adjust individual parts yourself without consulting the manufacturer.
Care for decorative panels is carried out in accordance with the requirements for the care of furniture and wooden products. Do not use cleaning agents, aggressive liquids, solvents or abrasives.
If door systems are used for purposes other than their intended purpose, the manufacturer is not responsible for their integrity and proper operation.
It is recommended to lubricate the hinge assembly with a thin layer of lubricant every 6 months.
Packing in bubble wrap | Packaging features |
---|---|
Contents | Bubble film, cardboard corner, stretch film |
Description | It consists of a door block wrapped in bubble wrap at the corners, a cardboard corner that ensures the safety of the door during transportation, wrapped in stretch film |
Height, mm | 90 |
Length, mm | 2,100 |
Width, mm | 900; 1,000 |
Packing on pallet | Packaging features |
---|---|
Contents | Pallet, stretch film, cardboard corner |
Description | Packed doors are stacked vertically on a pallet; A cardboard corner is installed in the corners, designed to preserve the doors during transportation; then the packaging is wrapped with stretch film |
Number of items in the packaging | 22; 23 |
The door can be transported in the manufacturer's packaging both vertically and horizontally by all types of covered transport or in containers.
When transporting and storing doors, measures must be taken to protect them from mechanical damage, violation of original packaging, contamination, and exposure to precipitation.
9. We undertake, at our option, to eliminate identified defects, replace defective products with serviceable ones, or reimburse the costs of purchasing defective products. We do not cover the costs of dismantling and installing the door, as well as transportation costs, except in cases specifically stipulated in the purchase and sale agreement.